In the ever-evolving realm of civil engineering, the backbone of structural ingenuity lies in the evolution of concrete technologies. This comprehensive guide seeks to unravel…
Construction Project Management
Advancements in bridge design
Introduction: An eco-friendly foundation in the context of construction refers to the use of sustainable and environmentally conscious practices and materials in the process of…
What is footing in construction? A footing is a structural component in construction that serves as the base or foundation for a building or other…
Introduction to Asphalt Work in Highways Asphalt work plays a crucial role in the construction of highways, ensuring smooth and safe journeys for travelers. Over…
MD. Abdullah Al Naim BSc in Civil Engineering, AUST Weather conditions play a crucial role in the planning and execution of construction projects. Weather Factors…
Introduction The underground or sub-soil strata/classification within the project site varies and is uncertain. This may result in insufficient bearing capacity of constructed bored piles…
Designing the foundation of Padma Bridge was complicated. Because, in addition to the heavy live loads it must support, it must also be able to…
Introduction The 100 km long Padma River in central Bangladesh runs southeast from the Jamuna (or Brahmaputra) confluence and the Ganges to join the upper…
Bore pile, also known as drilled pile or auger-cast pile, is a method of deep foundation construction that entails drilling a hole into the ground…
MD Abdullah Al NaimB.Sc in Civil Engineering (Appearing)Ahsanullah University Of Science and Technology Dhaka, the capital of Bangladesh. It is one of the world’s most…
Static load test for bore piles: A static load test is a process that assesses a structure or foundation’s capacity to support a specific load.…
Projesh Biswas Construction Supervision Consultant Padma Multipurpose Bridge Project https://www.linkedin.com/in/projeshbiswas Everyone knows the history and majesty of The Padma Bridge.But a few can imagine the…
Dynamic load test for pile is a method which we use to assess the integrity and load-bearing capacity of piles used in construction projects. It…
Compaction of fresh concrete: Fresh concrete can contain 5% to 20% confined air which may reduce the concrete strength and density. It’ll help to increase…
Md. Amin-Uzz-Zaman MadaniBSc in Civil EngineeringAhsanullah University of Sciecne and Technology First and foremost, what is a checklist? A checklist is just a list of…
After publishing an article on Construction site Tests , a lot of you wanted to know more about PIT and Dynamic Pile Load Test .…
Syed Abid Hassan Practitioner of Materials Engineering M.Sc. (JU), B.Sc. in Civil Engineering Recently we’ve done a successful plant trial for concrete mix design…
Bangladesh is becoming a role model to the world for having a constant growth and reducing poverty. The whole country is developing day by day.…
As a Civil Engineer, we often need to perform various tests on site. These tests help us to know about quality of materials and works.…
Shaurov Sheikh B.Sc in Civil (AUST), MBA (AIUB) Senior Executive, Cost Control Max Infrastructure Limited The said terms are relatively new to the construction sector…
As a bridge engineer, you must’ve heard about Balance Cantilever Special Bridges. This is a special kind of bridge which helps us to have a…
A horizontal main structural member with a T-shaped cross-section that works as main support for vertical loads is known as a T-girder in the civil…
Concrete: Concrete is a construction material composed of fine and coarse aggregate bonded together with cement paste that hardens (cures) and gains certain strength over time.Latin word…
A construction site is always risky as any kind of accident can occur at any time. A very simple ignorance at a construction site may…
Md. Balayet Hossain (Ifat)Field Engineer (Consultant) RTW Padma Multipurpose Bridge ProjectB.Sc. in Civil Engineering (AUST) M.Sc. in WRE (BUET) Introduction: River training work is very…
MD.Abdullah Al Naim BSc in Civil Engineering, AUST Introduction: One of the most frequently used building materials is concrete, but it is prone to various…
 River Training Work (IMRTW)){kind=link}
